This tutorial will walk you through the process of making a basic, boned Victorian underbust style corset from scratch. It is written with the novice corset maker in mind, providing start-to-finish instructions using a method that is much more straightforward and forgiving of imprecision and errors than most of the methods described in my tutorials.
This tutorial will walk you through the process of making a basic, boned Victorian underbust style corset from scratch. It is written with the novice corset maker in mind, providing start-to-finish instructions using a method that is much more straightforward and forgiving of imprecision and errors than most of the methods described in my tutorials.
This tutorial describes how to create a floating lining for your corset. A floating lining is when the lining is only attached around the edges, and not at each seam. The advantages of a floating lining are reduction of bulk at the seams while sewing and it can be replaced at a later date if needed.
The first part of that material is something I’ve been asked for time and time again, a piece on pattern drafting. This only begins to scratch the surface of the subject of corset pattern drafting, but starting from scale patterns and pattern modification is a great way to cut your teeth on the subject. By starting with a scale or other existing pattern, you don’t have to guess about shape, and can familiarize yourself with how the lines of the pattern affect the final design of the corset.
This tutorial walks you through the process of taking a scale underbust pattern and transforming it into a full-size pattern, altering it as needed to fit your measurements. Included are four vertical-panel underbust patterns you can use to create your own pattern. The alteration information in this tutorial can also be used to help you modify a commercial pattern to fit.
Last night I finished re-writing my blog entries about the corded Regency corset. The formal tutorial shows the process I used to create a full-length corded Regency corset with a busk pocket and period style fan lacing.
This tutorial will walk you through the process I used to create a full-length corded Regency corset with a busk pocket and period style fan lacing. This is one type of support garment worn during the Regency period, roughly 1800-1815, and a common choice for modern costumers seeking to reproduce the fashions of the Regency and early Victorian.
The bust ribbon is a small ribbon along the top of the bust which can be tightened to cinch in the top of the bust slightly, or just tied into a nice little bow for decoration. This tutorial shows the bust ribbon added to a corded Regency style corset, and I used narrow silk taffeta.
The bust ribbon is a small ribbon along the top of the bust which can be tightened to cinch in the top of the bust slightly, or just tied into a nice little bow for decoration. This tutorial shows the bust ribbon added to a corded Regency style corset, and I used narrow silk taffeta.
This tutorial shows how to make a very basic busk pocket, applied to the front of a corset which does not have boning in the busk area.