Originally posted July 1, 2010. Commissioned plain black coutil underbust corset. It is made from two layers of black coutil, with 1/4″ spring steel flat boning, a lacing panel, and a double busk.
Read MoreOriginally posted on April 30, 2010. Fabric: Polyester double-satin ribbon and corset coutilBoning: 1/4″ flat spring steel bonesBows: Double-satin ribbon, tied on through buttonholes at the top of the busk.Busk: 8″ metal straight double-busk Commissioned tight-lacing corset, partial trade for modeling.
Read MoreOriginally posted February 14, 2010. It’s worth noting that the modeled photos I hoped for never happened, so these are the only photos of this garment. Fabric: Silk backed with corset coutilBoning: 1/4″ flat spring steel bonesBow: Silk cover fabricBusk: 9″ metal straight busk This is a fabric-based Edwardian ribbon corset. Each of the “ribbons”
Read MoreOriginally posted on February 3, 2010. Commissioned basic Edwardian long-line corset. A long-line corset is one that completely covers the hips, and is longer in front than a busk can comfortably go. This is as short as a long-line corset can be, but they can also extend as far as the knees, and are designed
Read MoreOriginally posted on December 17, 2009. Commissioned custom steampunk underbust corset. Core is two layers of corset coutil, boned with 1/4″ and 1/2″ wide spring steel flats. Busk is 8″ long. The buckles and edging are leather. The cover is a last-minute choice upholstery brocade. The first cover the customer chose didn’t work as well
Read MoreOriginally posted on December 16, 2009. Commissioned mesh underbust corset. This corset is made using a heavy-duty sport mesh. The boning channels are coutil, and ribbon is used to support the body of the corset. The busk is 8″ long.
Read MoreOriginally posted on December 14, 2009. The corset is made from two core layers of coutil, with a dupioni silk cover. The contrast stitching and flossing was made with upholstery thread. The boning is 1/4″ and 1/2″ wide spring-steel flats. The busk is a 10″ busk with a backing bone. Edging is bias-cut contrast silk
Read MoreOriginally posted on November 24, 2009. Commissioned underbust corset for *mizzd-stock, followup to the concept sketch posted below. It’s made from two layers of corset coutil, tea-stained. The boning is 1/4″ spring steel flats, it has a metal busk, and a busk backing. The two hearts are dupioni silk, hand-sewn to the corset with 100%
Read MoreOriginally posted on November 23, 2009. Commissioned tight-lacing underbust corset.It’s made from two layers of black cotton coutil, boned with spring steel flats.
Read MoreOriginally posted on November 2, 2009. Commissioned overbust corset The core is two layers of coutil, boned with 1/2″ and 1/4″ wide spring-steel flats. Cover material is dupioni silk. The lace at the bust was a bit of left-over from another corset project, which I added at the last minute to give the corset a
Read More