Originally posted on September 20, 2009. Custom overbust corset commissioned by *Spikanard. Two layers of corset coutil for the core, boned with 1/4″ wide flat spring steel bones. Cover is a polyester brocade, pattern matched at the seams. Seams are covered with black double-satin ribbon.
Read MoreOriginally posted on August 16, 2009. Commissioned Tight-Lacing Corset Victorian/Edwardian style waist cincher/underbust corset, designed for tight-lacing. Each side of the corset has seven panels, 3 1/2″ wide spring steel bones, and 10 1/4″ wide bones. The core is two layers of cotton coutil. Both the waistline and the grommets are re-enforced with 100% cotton
Read MoreOriginally posted on July 25, 2009. Commissioned custom underbust corset for everyday wear. It’s made with two layers of cotton coutil, tea stained. It was designed for optimum tummy control, and to sit about an inch below the bottom of a bra.
Read MoreOriginally posted on July 18, 2009. Custom Victorian overbust corset for re-enactment. It’s made with two core layers of coutil and broadcloth cover and lining. The gores are quilted, the bones are hand flossed, and lace has been applied to the top and bottom edges.
Read MoreOriginally posted on July 8, 2009. Commissioned overbust wedding corset with white rose brocade cover.
Read MoreOriginally posted June 8, 2009. Plus-sized corset with black rose brocade cover and built-in garters. The busk is 17″ on this one, and it’s underbust.
Read MoreOriginally posted May 2, 2009. Custom waist cincher corset. The waist is 22″ with a 3″ gap. The busk is 6″ long, and it’s designed to sit about 1.5″ over her ribs and her hips. The cover material is silk dupioni, the core is two layers of coutil, and it’s lined with cotton broadcloth. Top
Read MoreOriginally posted April 13, 2009. Commissioned custom corset. It is a high overbust corset, with removable modesty panel to cover cleavage. The cover material is burgundy satin with black lace overlay. Edgings under the grommets and over the busk are black ribbon, to prevent tearing of the lace. The cleavage modesty panel is attached with
Read MoreOriginally posted March 27, 2009. This is a custom men’s tight-lacing corset. It is made from two layers of coutil, tea-stained to a flesh tone. To help reduce heat retention, lining and cover material were left off.
Read MoreOriginally posted March 16, 2009. Commissioned custom corset – a modern bra-cup overbust with low back. It is to be worn with a dress that has a very low back. The is the first garment I have made with a bra-cup top, which proved to be far more work than I was expecting. I have
Read More